Command 3m - 3 Utensil Hooks, Removable
3 Hooks. 4 Small strips. Holds on strong; Comes off cleanly; No surface damage. Each hook holds 1/2 lb (225 g). Hooks can be reused with Command Adhesive Small Strips. Limited warranty. Hooks made in Taiwan. Strips made in U.S.A.
Follow instructions carefully! Save instructions for clean removal in the future! To Mount Hook: 1. Clean Surface: Use isopropyl rubbing alcohol, wipe lightly, let dry. Do not use household cleaners. 2. Apply Strip: Remove red Command Adhesive liner. Align square end with edge of hook. Press firmly. 3. Press Firmly! - Remove black wall side liner. Position hook and press entire hook firmly for 30 seconds. 4. Wait 1 hour before use. To Remove Hook: 1. Grab Removal Tab - To prevent hook from snapping your fingers, hold hook as shown. Do not press hook against wall. 2. Slowly slide the tab straight down against the wall stretching the strip at least 6 inches (15 cm) until hook releases from the wall. Never pull the strip out at an angle. Strip could break or damage the surface. Note: Apply to surfaces above 50 degrees F (10 degrees C). Adhesive could soften and lose adhesion above 105 degrees F (40 degrees C).
Do not use with delicate or paper wallpaper. May not adhere well to some vinyl wallpapers. Do not use for antiques, heirlooms, or other valuable or irreplaceable items. Do not hang objects over beds.