Custom Accessories Rear View Mirror Adhesive
|Special Info for This Item|
|FREE Shipping Eligible|
Adhesive .01 fl oz; Primer .02 fl oz. Auto accessories for today's lifestyle. Bonds bracket to windshield. Made and printed in the U.S.A.
Read instructions carefully. Must use Part A before Part B. 1. (A) Accelerator/primer (B) Adhesive. 2. Outline outside of windshield with crayon to identify old location of rear view mirror bracket. Thoroughly clean inside windshield glass and mirror bracket with new single edge razor blade. 3. Discard cardboard cylinder from Part A. 4. Bend vial until cylinder inside plastic sleeve snaps, allowing primer to reach felt tip. 5. a. Apply primer (A) to bracket with felt tip. b. Apply primer (A) to inside glass at previously marked location. Wait five minutes for primer to dry. 6. Coat with thin layer of adhesive (B). 7. Apply bracket to windshield. Hold firmly for a minute-and-a-half. Allow to set five minutes and mount mirror to bracket.
Eye irritant. May irritate sensitive skin. Adhesive contains acrylic acid derivatives. In case of eye contact, flush with water for 15 minutes. Get medical attention. Wash after skin contact. Keep away from children. Vapor harmful. Primer contains trichloroethylene. Avoid breathing vapor. Use adequate ventilation. Test effect on surfaces before applying. Keep away from children.