Set Favorite Store Page
show timeout overlay link

Your Session Is About to Expire

This online session is about to expire due to inactivity. Click Continue to return to page.

Home | Shop | Household & Grocery | School & Office Supplies | Tape, Glue & Adhesives | Elmers Instant Krazy Glue All Purpose
Elmers Instant Krazy Glue All Purpose

Elmers Instant Krazy Glue All Purpose

Price:  $2.49 ($35.57 / oz.)

Sku: 183830         Size: .07 OZ          Wt: 0.01 LBS

Special Info for This Item
Free Shipping FREE Shipping Eligible
Cannot Ship by Air Cannot Ship by Air
Check Store Availability Check Store Availability

Now bonds better on plastic, metal, wood, rubber, glass, ceramic. Stay fresh container. One drop applicator. Forms a strong, long-lasting bond on most surfaces. Krazy Glue is packaged in our exclusive leakproof (convenient for storage), airtight (keeps product fresh) care. Best for these surfaces: ceramic, rubber, wood, metal, plastic (PVC, ABS, FRP), glass. Made in Japan.

Read instructions before using. 1. Protect work area. Glue may damage fabrics and furniture finishes. 2. Remove glue tube from case. Hold upright and point away from eyes and body. 3. Insert pin in tip of tube. If glue clogs at tip, pierce again with pin. Always point away from eyes and body before removing pin. 4. Parts to be glued should be clean and dry. Parts must mate. Metals may have to be cleaned with a solvent or scraped. Dampen porous ceramics on one side and apply glue to dry side. 5. Gently squeeze a small drop of glue on one side of part. Apply one drop per square inch. Too much glue or spreading glue will make a poor bond or not bond. 6. Join the parts and press for 30 seconds. Allow to set for a few minutes. 7. Insert pin in tip of tube. Store upright in capped case. Not for use on foam, rear view mirrors, polyethylene, Teflon or other fluorocarbons. Do not put bonded items in oven or on stove. Do not use to attach artificial nails. Store in cool, dark place.

Eye and skin irritant. Bonds skin instantly. Contains ethyl cyanoacrylate. Avoid contact with skin and eyes. If eye or mouth contact occurs, hold eyelid or mouth open and rinse thoroughly but gently with water only for 15 minutes and get medical attention. Liquid glue will sting eye temporarily. Solidified glue may irritate eye like a grain of sand and should be treated by an eye doctor. If skin bonding occurs, soak in acetone-based nail polish remover or warm soapy water and carefully peel or roll skin apart (do not pull). Contact through clothing may cause skin burn. If spilled on clothing, flush with cold water. Avoid prolonged breathing of vapors. Use with adequate ventilation. Keep out of reach of children.