STP Dot 3 Heavy Duty Brake Fluid
|Special Info for This Item|
|FREE Shipping Eligible|
|Cannot Ship by Air|
Protects brake system. For disc or drum brake systems. Specially formulated for optimum performance for all disc or drum brake systems in today's cars and trucks. STP Heavy Duty Brake Fluid: Provides protection against brake failure from vapor lock; Helps prevent corrosion in brake system; Works with all brake systems requiring Dot 3 fluids. Made in the U.S.A.
Clean all dirt from around cover on Master Cylinder before removing. Fill unit to level specified by manufacturer. Replace cover. Check fluid level once a month. To bleed system: Refer to service manual, do not reuse brake fluid from bleeding operation.
Never wash cylinders or parts with gasoline, kerosene or oil. Avoid spilling brake fluid on brake lining or car finish. Follow vehicle manufacturer's recommendations when adding brake fluid. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs. Store brake fluid only in its original container. Keep container clean and tightly closed to prevent absorption of moisture. Do not refill container and do not use for other liquids. Minimum wet boiling point 284 degrees F (140 degrees C). Harmful if swallowed. Eye irritant. Avoid eye and prolonged skin contact. Do not ingest. First Aid: Eyes - Immediately flush with water for 15 minutes. Contact physician immediately. Skin - Wash with soap and water after use. If Swallowed - Immediately contact physician or Poison Control Center. Keep out of reach of children. Note to Physician: Contains diethylene glycol, triethylene glycol, and polyalkylene glycol ethers.