Shop all categories

Resolve High Traffic Carpet Cleaner Foam, 22 OZ

Resolve High Traffic Carpet Cleaner Foam, 22 OZ
$
6.9931.8¢ / oz.
Limit 2 per order
Only in stores

Find this item at a nearby store

Enter ZIP code or location

Resolve High Traffic Carpet Cleaner Foam, 22 OZ
22 OZ, 1.7 lbs. Item # 489889

Resolve high traffic carpet cleaner foam has a new and improved formula to help make cleaning the busiest areas of your carpet easier. New and improved formula foam safely cleans and deodorizes high traffic areas like hallways, stairs and living rooms. Now removes 100% more dirt and acts as a refill for the easy clean pro carpet cleaner machine.

Directions
Before Cleaning: Vacuum carpet thoroughly to remove loose dirt. Test a small, hidden area for colorfastness and examine when dry. If color's affected do not use. For upholstery, look for manufacturer's cleanability code tag. Use on fabrics coded WS or W. If coded X or S, do not use. Not recommended for use on velvet, silk, vinyl, or leather. Do not use Resolve Easy Clean Pro on any surface other than carpet. Large Area Carpet Cleaning: 1. Shake can well. Hold can upside down about 2 feet above carpet. Spray foam evenly over a 3 foot square area. 2. Work the foam into carpet in two directions using a damp, colorfast mop. 3. Repeat steps 1 and 2 until the entire area is cleaned. 4. When dry, vacuum thoroughly to remove dried foam and loosened dirt. For Use in Resolve Easy Clean Pro Carpet Brush: 1. Remove cap from Resolve High Traffic Foam 22 OZ can. Shake the can vigorously before each use. If the can is already in the gadget, remove and shake again. 2. Insert can into the gadget and rotate clockwise until gently clicks into the locked position. 3. To remove the can, rotate counter-clockwise into the unlocked position and gently pull upwards. 4. Pull trigger to dispense foam, then brush the foam into the carpet. When dry, vacuum thoroughly to remove dried foam and loosened dirt. 5. Replace spray cap to can for standard use. Upholstery Cleaning: 1. Blot wet soils with a clean absorbent cloth. 2. Shake can well and generously apply directly to stain from a distance of 4-6 inch. Allow foam to absorb into stain for 3 minutes. 3. Gently blot area with a clean, damp, colorfast sponge or cloth. Rub gently if required. Do not over wet fabrics. Hint: To avoid rings, clean entire section where soil occurs. 4. Rinse sponge or cloth and repeat as necessary. Allow fabric to dry thoroughly before use. 5. Only use spray cap to dispense foam for upholstery cleaning. To ensure dispensing during life of product, tilt can downwards at approximately 60° while spraying. Contents will clean a carpeted area of 168 square feet (12 feet x 14 feet). If accidentally sprayed on wood furniture, just wipe of. For best results: use vacuum cleaner with a fresh empty bag.

Warnings

Contents under pressure. Read precautions on back. Keep out of reach of children. May cause eye irritation. Contents under pressure. Do not spray towards face. Avoid contact with eyes and skin. Container may explode if heated. Do not puncture or incinerate container. Do not expose to heat or store at temperature above 120° F, as the container may burst. First Aid: If in eyes, immediately rinse eyes with plenty of water. Remove contact lenses and continue to rinse for at least 15 minutes. If irritation persists, get medical attention. When using Resolve Easy Clean Pro Carpet Brush, direct aerosol away from face when loading the device and replacing the spray cap to can.
*Customer reviews and ratings solely reflect the views and opinions of the individual contributors and are not created or endorsed by CVS Pharmacy. Please review the product labeling and consult with your doctor with any health or medical questions.