Flex Seal Clear

AS SEEN ON TV, Flex Seal Clear is the easy way to coat, seal and protect surfaces. It stops leaks, seals and protects multiple exterior equipment. EXCELLENT FOR: skylights, gutters, downspouts, flashings, windowsills, PVC pipes. roof leaks, hoses, chimneys,  duct work, foundations, awnings, vent pipes, A/C drip pans, RV's and campers, trailers and So Much More! STOPS LEAKS FAST! FLEX SEAL CLEAR is an easy-to-use rubberized coating that sprays out as a liquid, seeps into cracks and holes and dries to a watertight, flexible coating that is virtually invisible. FLEX SEAL CLEAR seals out water, air and moisture and helps prevent rust and corrosion. Once dry, FLEX SEAL CLEAR can be painted over. FLEX SEAL CLEAR is the easy way to coat, seal, protect and STOP LEAKS FAST! CONTAINS NO CFCs which deplete the ozone layer. Made in Canada. Rubberized coating sprays out as a liquid
Dries to a watertight, flexible coating
Virtually invisible

Directions: so easy to use! For best results use multiple coats. Protective clothing recommended
Use only in a well-ventilated area. When using inside, prevent vapor buildup by opening doors and windows.
Ensure fresh air entry during application and drying
Do not use near heat, sparks, pilot lights or other sources of ignition. When covering large areas indoors, eliminate ignition sources far from the point of use because vapors are heavier than air and may travel significant distances.
When applying to large areas indoors, do not exceed use of 1/2 of a can before allowing one hour for the coating to dry and vapors to dissipate before using again.
Shake well and spray using an even sweeping motion
Apply several even coats until ALL cracks and holes have been filled
Allow FLEX SEAL® CLEAR to dry completely before applying the next coat. Fully cures in 24 hours.
Spray a larger area than where the leak occurred and feather edges
Works best at can temperatures above 60°F
Occasionally shake can throughout application