3M Command Adhesive Medium Designer Hook
|Special Info for This Item|
|FREE Shipping Eligible|
1 3M hook, 3 Commands Adhesive medium strips. Holds on strongly. Comes off cleanly. No surface damage. Each hook holds 1 kg (3 lb). Hooks can be reused with Command Adhesive Medium Strips.
Follow instructions carefully! Save instructions for clean removal in the future! To Mount Hook: 1. Clean surface. Clean the surface with isopropyl rubbing alcohol, wipe gently, let dry. Do not use household cleaners. 2. Apply strip. Remove red Command Adhesive liner. Align square end with raised line on back of hook. Press firmly. 3 Press Firmly! Remove black wall side liner. Position hook and press entire hook firmly for 30 seconds. 4. Wait 1 hour before use. To Remove Hook and Base: 1 Slide hook cover up. Reveal mounting base and removal tab. 2. Grab removal tab. To prevent base from snapping your fingers, hold base as shown. Do not press base against wall. 3. Slowly slide the tab straight down against the wall at least 12 inches (30 cm) until mounting base releases from the wall. Never pull the strip out at an angle. Strip could break or damage surface. Note: Apply to surfaces above 50 degrees F (10 degrees C). Adhesive could soften and lose adhesion above 105 degrees F (40 degrees C).
Do not use with delicate or paper wallpaper. May not adhere to some vinyl wallpapers. Do not use for antiques, heirlooms, or other valuable or irreplaceable items. Do not hang objects over bed.